How To Repair Chipboard Screw Holes

Download Article

Download Article

Chipboard, also known as particle lath, is a common textile in easy-to-gather article of furniture, countertops, and even cabinets. Since chipboard is made from compressed forest pieces, screws accept a tendency to come up loose or break the chipboard. Luckily, in that location are a few ways you tin can fix the holes to hide damage or go on your screws tight. Nosotros know you probably accept some questions, and then we'll go over the nigh common repairs you tin can try and so your chipboard looks proficient as new!

1. 1

   Wood glue and sawdust are perfect for a simple repair. Take some leftover sawdust from other structure projects and mix it into a thick paste with some wood glue. Scoop the mixture into the screw hole and press information technology down firmly with a putty knife. Permit the paste dry overnight so it hardens completely. Then simply use some sandpaper to smooth out any crude edges until information technology's affluent with the surface.^[i]

   • Try to use sawdust that's similar in color to the wood, or else your repair may be noticeable once you're finished.
   • Since the paste and sawdust hardens to a consistency like to the rest of your chipboard, you can screw into it again if you demand to.

2. two

   Make full the pigsty with machine body filler for the strongest ready. Automobile body fillers unremarkably come up every bit a carve up hardener and filler, so mix them together with a putty knife offset. Since the color probably won't match the color of your wood, mix in some sawdust to aid it blend in. Push the filler into the hole, but work quickly while it's even so pliable. Let the filler cure completely, which usually takes a few hours.^[2]

   • Yous tin can buy auto body filler from your local hardware or automotive store.
   • Some fillers come with color dyes that y'all can mix in to match the color and stop of the chipboard.
   • If y'all still want to put the screw in the hole, lubricate the screw with a spray lubricant and push it into the hole while the filler is still moisture. Let the filler harden for 3–4 minutes before pulling the screw out. That way, the filler has the shape of the threadings to keep the spiral secure.

   Advertisement

1. 1

   Stuff the hole with toothpicks or dowels for a quick, cost-constructive fix. Filling the entire hole with toothpicks or a dowel tightens the pigsty and so your screw gets extra grip. Button the toothpicks or wooden dowel into the spiral pigsty as far every bit y'all can. Suspension or saw off the excess material that extends past the pigsty. Put the spiral back in the hole and slowly tighten it dorsum into the chipboard with a screwdriver.^[3]

   • You can put a few drops of wood glue into the hole earlier adding the toothpicks or dowel to help them stay in place, but it's not required. If you do, permit the gum dry completely before putting the screw back in.^[4]
   • If a dowel plugs the entire pigsty, drill a airplane pilot hole in the dowel before driving the spiral in. That way, you prevent the woods from splitting.

2. two

   Put an anchor in the hole to keep the screw from ripping through wood. Anchors are plastic sleeves that push against the wood so they're less likely to come out. Apply a drill chip that'due south the same diameter as your anchor to widen the screw hole. Tap the anchor all the way into the hole. And so, ready the screw inside of the anchor and tighten it.^[five]

   • You can buy anchors from your local hardware store.
   • The anchors you use are usually more visible even after you install them.

3. 3

   Fill information technology with wood glue and button the screw inside for a permanent solution. Start off past blanket the screw's threading with a lubricating wax or oil. Clasp forest glue into the hole then information technology's about halfway full. Button the screw into the hole as far every bit you tin. Let the glue dry overnight before removing the screw. Scrape any of the glue that came out of the hole with a razor blade so it'south flush with the chipboard. Since the glue gear up around the screw's threadings, you can easily spiral it back into the pigsty.^{[half dozen]}

   • This option isn't as potent of a prepare as the other options, just it makes the screw hole less visible.
   • If you don't glaze the screw with wax or oil, then it will get stuck in the glue and won't unscrew easily.

   Advert

1. 1

   Yes, just push button the wood filler into the pigsty with a putty knife. Look for a wood filler that has the aforementioned color every bit your chipboard then it blends in easier. Press the forest filler into the hole using a putty knife until it'due south completely total. Permit the wood filler dry following the instructions on the packaging. Then, sand the filler smoothen and then it's affluent with the surface.^[7]

   • You tin paint or stain filler to match the finish of the wood.
   • Cull a water-based filler for indoor use or a solvent-based filler for outdoor repairs.

1. 1

   No, wood filler works best for corrective repairs. Wood filler doesn't take the same structural integrity every bit your actual chipboard, so hardware may still come loose if you screw into it. If you need to reattach screws, opt for a more secure filling method instead, such as anchors or machine body filler.^[8]

   Advert

1. ane

   Switch to self-tapping screws that are less likely to come up loose. Since chipboard is made from multiple pieces of compressed wood, it'southward a lot easier for standard screws to come undone. Self-tapping screws cut through the wood rather than splitting it so you don't have to pre-drill holes. Pick up a bundle of self-tapping screws whenever you need to adhere something to your chipboard.^[9]

   • Await for screws that are specifically labeled for chipboard or particle lath since they'll be more secure.

2. 2

   Try using longer screws for a tighter fit. Longer screws go deeper into the wood, so they get a little more than grip than ones that are shorter. If you have a thick piece of chipboard, endeavour to discover a spiral that's almost ¹⁄_two inch (1.3 cm) longer. Place the new spiral in the hole and tighten it completely until it's secure.^[10]

   Advertisement

Ask a Question

200 characters left

Include your email address to get a bulletin when this question is answered.

Submit

Advertizing

Cheers for submitting a tip for review!

• Chipboard doesn't agree up to wear and tear over fourth dimension, so if you've fabricated multiple repairs on it, yous might be better off replacing it instead.^[11]

• Avoid screwing into woods filler since information technology doesn't have the aforementioned structural support every bit the actual chipboard.^[12]

Advertizement

About This Article

Thanks to all authors for creating a page that has been read 13,509 times.

Did this article help you?

Source: https://www.wikihow.com/Repair-Screw-Holes-in-Chipboard

Posted by: brittournothe.blogspot.com

Share this post